Destination and intended buyer
Two questions decide which rules apply: where you will sell, and who the jewelry is made for. US law treats jewelry designed or intended primarily for young children as a children's product, with stricter limits and mandatory testing; the age cut-off is set in the regulation, so check the current text before you place a piece in that category. How you market a piece counts too: packaging, product photos and listing text that present it as suitable for children can make it a children's product.
The same piece can fall under different rules in different markets. A nickel-plated adult bracelet that is fine in one market can fail a nickel-release test in another, and a charm sold as a gift for a child has to meet a stricter set of limits than the same charm sold as an adult accessory. Decide the market and the age group first, then choose materials and finishes to fit.
Limits and standards are revised from time to time, so confirm the current values with your lab before you list a piece.
United States: children's jewelry
US children's jewelry: lead ≤ 100 ppm in substrate, ≤ 90 ppm in coatings (CPSIA).
Testing: a CPSC-accepted third-party lab must test the product, and you issue a Children's Product Certificate based on those results. A test that no CPSC-accepted lab ran does not meet this requirement.
Children's jewelry standard: ASTM F2923 adds cadmium limits and other checks for children's jewelry. Many retailers and marketplaces ask for this report as well.
Small parts: products for the youngest children must not contain small parts (16 CFR 1501). Charms and beads are small, so the age group you sell to matters.
For charms in particular, name the target age in the quote request; it decides which tests apply.
United States: adult jewelry and California
ASTM F2999 is the voluntary US standard for adult jewelry. It sets limits for lead and other metals by material type, and marketplaces and retailers often treat it as a baseline. The limits depend on the edition, so ask your lab which one it tests to.
California's jewelry law sets lead limits for all jewelry sold in the state, and lead and cadmium limits for children's jewelry. California: adult jewelry < 0.05% lead in plated or unplated metal (SB 647, from June 2020).
Proposition 65 requires a clear warning when a product can expose consumers in California to listed chemicals such as lead or cadmium above set levels. A warning does not make a piece legal if it exceeds California's jewelry limits.
European Union: REACH
Nickel (Annex XVII, entry 27): items in direct and prolonged contact with the skin are limited in how much nickel they release. EU REACH: nickel release ≤ 0.5 µg/cm²/week, ≤ 0.2 for piercing posts (EN 1811). Plated pieces first go through a simulated wear step (EN 12472) before the nickel-release test.
EU REACH: lead < 0.05% and cadmium < 0.01% by weight per component. Lead falls under entry 63 and cadmium under entry 23.
Toys: jewelry sold as a toy, or mainly to young children, can also fall under toy rules such as EN 71-3.
Nickel is the one that catches fashion jewelry most often, because nickel can hide in a base metal, in a plating undercoat or in a clasp. A piece that passes on its main body can fail on a clasp or a jump ring, which is why a test report lists parts, not only the piece.
Choosing materials with the rules in mind
Material and finish decide how much of this work you do.
Stainless steel, titanium and 925 silver are the usual starting points when nickel release matters; the nickel-release result depends on the alloy and any plating, so include posts in the test scope. Ear posts are available in Titanium, Stainless steel, 925 silver.
Brass and zinc alloy rely on plating, so the plating and any undercoat belong in the test scope.
Coatings and paints are covered by their own limits, separate from the metal underneath.
Enamel and epoxy colors count as coatings, and stones and beads are separate components. A report that names each one is more useful than a report that names only the metal.
What testing a supplier does, and what you add
A supplier's own checks and a lab report do different jobs. Every batch is sampled for salt spray, artificial sweat, abrasion and nickel-release testing. These batch checks tell you whether a batch behaves like the last one. They do not stand in for a certificate or a report issued by an accredited lab for your product.
Two more options sit before shipment. We send photos or video of your order before shipment. Third-party inspection before shipment is welcome.
What to ask any supplier for
Dated reports from an accredited third-party lab that name the material, the finish and the tests.
For children's jewelry, results from a CPSC-accepted lab for your own product, so you can issue the certificate.
The parts covered: body, clasp, jump ring, plating, enamel, stones.
A match between the report sample and the production piece, so the result applies to what you buy.
On your own listing, state each piece by what it was tested for, such as "nickel release tested to EN 1811".
Next step
Tell us where you sell and the age group you sell to, and ask the quote to state which tests apply to your market. The quality page lists the quality checks and how often they run, the online sellers page covers marketplace requirements, and custom charms covers the age-group question for charms.



